Patented water softener Lynpha Dolce series

Soft water in your house!

The latest generation of patented water softener

The water softener LYNPHA DOLCE is an anti-limestone system for domestic use that completely revolutionizes the technology used until now for the regeneration of ion exchange resins. Thanks to the exclusive “DRL” patented technology (Double Resin Layer) combined with the use of high capacity, uniform particle size resins for softening of drinking water, LYNPHA DOLCE allows optimal use of brine and washing water, reducing the consumption of salt and water used for regeneration (-50% salt and water) and also its overall dimensions.

High reliability and ease of use

Using a microprocessor and a litre counter incorporated into the centralised control valve, LYNPHA DOLCE regenerates according to the quantity (volume) of water actually used. Since the water consumption of each home is usually variable, the computer changes the wash cycle frequency according to the volume of water produced daily. The microprocessor calculates the average consumption of the previous days and compares it to the residual cyclic capacity of the system. In the event of a power failure, all calculated data are stored to memory on a special chip. On request (optional), the water softener LYNPHA DOLCE can be supplied with automatic device for producing chlorine, able to sterilize the resin bed at each regeneration cycle.

Comparative table for salt and water consumption

Compact water softener easy to install

Stylish, small, versatile and compact, water softener LYNPHA DOLCE can be placed anywhere, without taking up precious space in the home. Thanks to its relatively small dimensions, it can be also installed where traditional water softeners would not fit (utility room, understairs, balcony, veranda, garage, etc.). In order to facilitate installation, the water softener is complete of brass threaded connections and a mixing valve to control the residual hardness (recommended value approx. 8 °F). To ensure the unit’s long-term effectiveness, it is advisable to install a pre-filter upstream of the water softener and a pressure reducing valve to prevent that the maximum allowed pressure of the inlet raw water is exceeded (recommended value 3.5 bar). The unit must be installed by a qualified operator in full compliance with the regulations in force as per Italian Ministerial Decree no. 37/08 and standards UNI 8065 for the safety of installations.

The water softeners LYNPHA DOLCE series are Made in Italy products using only the best materials and the most advanced processing systems complete with an instruction manual and assembly kit for simple and correct installation. As required by the Italian Ministerial Decree no. 174/2004, all components of the hydraulic circuit are non-toxic and made using materials suitable for contact with drinking water. Ecological, reliable and technologically advanced, LYNPHA DOLCE is a patented water softener for the treatment of drinking water and it conforms to the Italian Health Ministry’s Decree no. 25/2012 and EC standards. Warning: this appliance requires regular and periodic maintenance in order to ensure that the water treated meets drinking water standards and that the improvements as stated by the manufacturer are preserved.